The Telit UC864-E is a compact and powerful wireless communication module designed for embedded applications. It supports a wide range of wireless bands and network standards to ensure seamless connectivity in diverse environments. Some of the supported bands include GSM 850/900/1800/1900 MHz and UMTS 900/2100 MHz, making it suitable for global deployment. The module also adheres to various network standards such as GPRS, EDGE, HSDPA, and HSUPA, allowing for high-speed data transfer.
Key features of the Telit UC864-E include:
1. Compact Design: The module is small in size, making it ideal for space-constrained applications.
2. High Data Transfer Speeds: With support for HSDPA and HSUPA, the UC864-E enables fast and efficient data transfer.
3. Embedded TCP/IP Stack: The built-in TCP/IP stack ensures reliable and secure communication over the internet.
4. Extended Temperature Range: The module can operate in a wide temperature range, making it suitable for harsh environments.
5. Advanced Power Management: The UC864-E incorporates power-saving features, enhancing the module's battery life and reducing power consumption.
Overall, the Telit UC864-E is a versatile and reliable wireless communication module that offers extensive band support, network compatibility, and a rich set of features for seamless integration into various embedded applications.
|
Features
- HSDPA 7.2 Mbps
- UMTS/HSDPA (WCDMA/FDD) 2100MHz
- Quad-band EGSM 850 / 900 / 1800 / 1900
- GPRS multi-slot class 12
- EDGE multi-slot class 12
- Dimension: 30 x 36.2 x 4.8 mm
- Weight: 10 grams
- Extended temperature range
-30°C to +80°C (operational)
-40°C to +85°C (storage temperature)
Interfaces
- 80-pin Molex connector
- 1.8 / 3V UICC SIM card interface
- 22 GPIOs, 3 A/D and 1 D/A converter
- USB 2.0 full speed interface
- 50 Ohm murata GSC antenna connector
- ITU-T V.24 serial link through CMOS
UART, PCM interface
- Buzzer output
Approvals
|
Data
- HSDPA
- Downlink up to 7.2 Mbps
- Uplink up to 384 kbps
- WCDMA
Downlink/uplink up to 384 kbps
- EDGE
- Downlink up to 236.8 kbps
- Uplink up to 118 kbps
- GPRS
- Downlink up to 85.6 kbps
- Uplink up to 42.8 kbps
- PBCCH support
- CSD
- Downlink/uplink up to 14.4 kbps
- Available modes of operation
- AT commands on UART & data on USB
- AT commands on USB & data on UART
Electrical
- Output power
- Class 4 (2 W, 33 dBm) @ GSM 850 / 900
- Class 1 (1 W, 30 dBm) @ GSM 1800 / 1900
- Class 3 (0.25 W, 24 dBm) @ UMTS
- Class E2 (0.5 W, 27 dBm) @ EDGE 850 / 900
- Class E2 (0.4 W, 26 dBm) @ EDGE 1800 / 1900
|
- Sensitivity
– -108.2 dBm @ WCDMA 2100 MHz
– -107 dBm @ GSM 850 / 900 MHz
– -106 dBm @ DCS1800 / PCS1900 MHz
- Supply voltage
- Nominal: 3.8 VDC
- Range: 3.4 - 4.2 VDC
- Power consumption
- Off: < 26 μA
- Idle @ mode GSM: < 3.3 mA
- Idle @ mode UMTS: < 4.1 mA
- WCDMA voice channel < 690 mA @ worst network conditions
- GSM voice channel < 317 mA @ worst network conditions
- WCDMA data channel < 680 mA @ worst network conditions
- HSDPA channel < 730 mA
@ worst network conditions
- GPRS Class 12 < 790 mA
@ worst network conditions
- EGPRS Class 12 < 560 mA
@ worst network conditions
Additional features
- Voice and SMS
- TCP stack with IP and UDP protocols
- Standard and extended AT command set
- Minimal power consumption
- PFM (Premium FOTA Management) Over the Air Update
- MUX driver for WinCE
- RIL Driver for WinCE
- USB Driver for WinCE, WinXP/Vista/W7, Linux and QNX.
|
